1.Select “SD Card Record Config”2.Set “Record”, “Resolution”, “File length(minute)”(Note: Blue light blinking means the camera is recording ) “SD Card Record Config” -- profile introductionWhen you insert the memory card, it will display the capacity of the card if the camera read it successfully(Note:1.Before inserting the card, please turn off the camera;2.Don’t take down the card when the camera is recording )Record - Select RecordClose - No recordingOn alarm - it only start to record when it detects motion(see “Alarm Config”)All Day - It will keep recording 24 hours a day.Timing record - it only start to record at the appointed time that you setResolution - Select the video resolutionFile length(minute) - the length of each video. For example: 3 minutes - Each video, 3 minutesRecord sound - turn on/offLoop recording - turn on/off
L6 Video Recording Setting
1.Select “SD Card Record Config”
2.Set “Record”, “Resolution”, “File length(minute)”
(Note: Blue light blinking means the camera is recording )
“SD Card Record Config” -- profile introduction
When you insert the memory card, it will display the capacity of the card if the camera read it successfully
(Note:
1.Before inserting the card, please turn off the camera;
2.Don’t take down the card when the camera is recording )
Record - Select Record
Resolution - Select the video resolution
File length(minute) - the length of each video. For example: 3 minutes - Each video, 3 minutes
Record sound - turn on/off
Loop recording - turn on/off